MEISTER | DD 400 | MeisterDesign. flex | Design flooring | Pure English oak | 06985 | Pore-synchronized structure | 1290 x 216 x 5 mm

MeisterDesign. flex is the modern renovation floor with a low installation height. This makes installation child's play - old subfloors such as tiles do not have to be removed because they are not visible under the stable planks. With 4 hours of water resistance, MeisterDesign. flex is also completely insensitive and even suitable for installation in damp rooms. The practical short plank format of the DD 400 collection also fits in smaller rooms and is also easy to transport and install.

The floor is ideal for all living areas as well as for commercial areas with heavy use such as open-plan offices, public buildings, etc. The design floor is water-resistant (4 hours protection against standing water). Can be laid in damp rooms such as bathrooms. Outdoor areas and wet rooms such as saunas, shower cubicles, steam baths and rooms with floor drains are excluded from use. Special requirements apply to treatment rooms and doctor's offices.

The installation substrates must be considered ready for installation in accordance with the generally accepted rules of the trade, taking into account VOB, Part C DIN 18 365 "Floor covering work". The installation substrate must be dry (max. 2% for mineral substrates or 1.8% for underfloor heating, max. 0.5% for anhydrite screed or 0.3% for underfloor heating residual moisture - measured with CM devices), level, solid and clean. Furthermore, unevenness of 3 mm/first meter and 2 mm for each additional linear meter must be leveled out in accordance with DIN 18 202, Table 3, Line 4. The installation instructions included with the product must be observed. When laying, an insulating underlay with a pressure stability > 60 kPa (CS value) and a special 5 mm tapping block are required.