MEISTER | DL 400 | MeisterDesign. flex | Design flooring | Princess Oak dark | 07134 | Pore-synchronized structure | 2055 x 216 x 5 mm

MeisterDesign. flex is the modern renovation floor with a low installation height. This makes installation child's play - old substrates such as tiles do not need to be removed, as they are not visible under the stable planks. With 4 hours of water resistance, MeisterDesign. flex is also completely insensitive and even suitable for installation in damp rooms. The impressive long plank format (2055 x 216 mm) allows the authentic, modern decors of the DL 400 collection to come into their own.

The floor is ideal for all living areas as well as for commercial areas with heavy use such as open-plan offices, public buildings, etc. The design floor is water-resistant (4 hours protection against standing water). Can be laid in damp rooms such as bathrooms. Outdoor areas and wet rooms such as saunas, shower cubicles, steam baths and rooms with floor drains are excluded from use. Special requirements apply to treatment rooms and doctor's offices.

The installation substrates must be considered ready for installation in accordance with the generally accepted rules of the trade, taking into account VOB, Part C DIN 18 365 "Floor covering work". The installation substrate must be dry (max. 2% for mineral substrates or 1.8% for underfloor heating, max. 0.5% for anhydrite screed or 0.3% for underfloor heating residual moisture - measured with CM devices), level, solid and clean. Furthermore, unevenness of 3 mm/first meter and 2 mm for each additional linear meter must be leveled out in accordance with DIN 18 202, Table 3, Line 4. The installation instructions included with the product must be observed. When laying, an insulating underlay with a pressure stability > 60 kPa (CS value) and a special 5 mm tapping block are required.